NSE 7 Network Security Architect Certification NSE7_EFW-7.0 Sample Questions Reliable
Prepare for the Actual NSE 7 Network Security Architect NSE7_EFW-7.0 Exam Practice Materials Collection
Fortinet NSE7_EFW-7.0 Certification Exam is an essential certification for security professionals who work with Fortinet Enterprise Firewall technologies. Fortinet NSE 7 - Enterprise Firewall 7.0 certification is recognized by many organizations and is highly valued in the industry. Fortinet NSE 7 - Enterprise Firewall 7.0 certification demonstrates that the candidate has the skills and knowledge required to manage and configure a Fortinet Enterprise Firewall solution effectively.
By passing the Fortinet NSE7_EFW-7.0 exam, IT professionals can demonstrate their expertise in managing enterprise firewall systems, which is essential for securing today's networks against a wide range of cyber threats. Fortinet NSE 7 - Enterprise Firewall 7.0 certification can help IT professionals advance their career and increase their earning potential. It can also help organizations identify and hire qualified professionals who can help them secure their network infrastructure and protect their valuable data.
Fortinet NSE7_EFW-7.0 certification exam is designed to test the candidate's knowledge and skills in enterprise firewall technologies, including Fortinet's proprietary FortiOS firewall operating system. NSE7_EFW-7.0 exam covers a wide range of topics, such as firewall architecture, security protocols, VPNs, advanced threat protection, and network security design. Fortinet NSE 7 - Enterprise Firewall 7.0 certification exam is intended for professionals who have a minimum of four to five years of experience in network security.
NEW QUESTION # 51
View the exhibit, which contains the output of a debug command, and then answer the question below.
What statement is correct about this FortiGate?
- A. It is currently in FD conserve mode.
- B. It is currently in system conserve mode because of high CPU usage.
- C. It is currently in system conserve mode because of high memory usage.
- D. It is currently in kernel conserve mode because of high memory usage.
Answer: C
NEW QUESTION # 52
Which configuration can be used to reduce the number of BGP sessions in an IBGP network?
- A. route-reflector enable
- B. route-reflector-client enable
- C. route-reflector-peer enable
- D. route-reflector-server enable
Answer: B
Explanation:
https://docs.fortinet.com/document/fortigate/7.0.11/cli-reference/572620/config-router-bgp set route-reflector-client [enable|disable]
NEW QUESTION # 53
Which two statements about an auxiliary session are true? (Choose two.)
- A. With the auxiliary session setting enabled, two sessions will be created in case of routing change.
- B. With the auxiliary session setting disabled, for each traffic path, FortiGate will use the same auxiliary session.
- C. With the auxiliary session setting enabled, ECMP traffic is accelerated to the NP6 processor.
- D. With the auxiliary session disabled, only auxiliary sessions will be offloaded.
Answer: B,D
NEW QUESTION # 54
Examine the following routing table and BGP configuration; then answer the question below.
The BGP connection is up, but the local peer is NOT advertising the prefix 192.168.1.0/24 .
Which configuration change will make the local peer advertise this prefix?
- A. Disable the setting network-import-check.
- B. Enable the setting ebgp-multipath.
- C. Enable the redistribution of connected routers into BGP.
- D. Enable the redistribution of static routers into BGP.
Answer: A
NEW QUESTION # 55
View the central management configuration shown in the exhibit, and then answer the question below.
Which server will FortiGate choose for antivirus and IPS updates if 10.0.1.243 is experiencing an outage?
- A. 10.0.1.244
- B. 10.0.1.240
- C. One of the public FortiGuard distribution servers
- D. 10.0.1.242
Answer: C
NEW QUESTION # 56
Examine the partial output from the IKE real time debug shown in the exhibit; then answer the question below.
Why didn't the tunnel come up?
- A. The remote gateway's Phase-2 configuration does not match the local gateway's phase-2 configuration.
- B. The remote gateway's Phase-1 configuration does not match the local gateway's phase-1 configuration.
- C. One IPsec gateway is using main mode, while the other IPsec gateway is using aggressive mode.
- D. IKE mode configuration is not enabled in the remote IPsec gateway.
Answer: B
NEW QUESTION # 57
View the exhibit, which contains the partial output of an IKE real-time debug, and then answer the question below.
The administrator does not have access to the remote gateway.
Based on the debug output, what configuration changes can the administrator make to the local gateway to resolve the phase 1 negotiation error?
- A. Change phase 1 encryption to AES256 and authentication to SHA256.
- B. Change phase 1 encryption to 3DES and authentication to SHA128.
- C. Change phase 1 encryption to AES128 and authentication to SHA512.
- D. Change phase 1 encryption to AESCBC and authentication to SHA2.
Answer: A
NEW QUESTION # 58
View the global IPS configuration, and then answer the question below.
Which of the following statements is true regarding this configuration?
- A. FortiGate will spawn IPS engine instances based on the system load.
- B. IPS will use the faster matching algorithm which is only available for units with more than 4 GB memory.
- C. New packets will be passed through without inspection if the IPS socket buffer runs out of memory.
- D. IPS will scan every byte in every session.
Answer: D
NEW QUESTION # 59
Which two statements about the Security Fabric are true? (Choose two.)
- A. Only FortiGate devices with fabric-object-unification set to default will receive and synchronize global CMDB objects sent by the root FortiGate.
- B. FortiGate uses FortiTelemetry protocol to communicate with FortiAnalyzer.
- C. Only the root FortiGate collects network topology information and forwards it to FortiAnalyzer.
- D. Only the root FortiGate sends logs to FortiAnalyzer.
Answer: A,C
Explanation:
FortiGate's to Root uses FortiTelemetry (TCP-8013) FortiTelemetry is also used for FortiClient communication Root Fortigate to FortiAnalyzer uses API (TCP-443)
NEW QUESTION # 60
Which of the following conditions must be met for a static route to be active in the routing table? (Choose three.)
- A. The next-hop IP address belongs to one of the outgoing interface subnets.
- B. There is no other route, to the same destination, with a higher distance.
- C. The outgoing interface is up.
- D. The next-hop IP address is up.
- E. The link health monitor (if configured) is up.
Answer: A,C,E
Explanation:
A configured static route only goes to routing table from routing database when all the following are met :
The outgoing interface is up
There is no other matching route with a lower distance
The link health monitor (if configured) is successful
The next-hop IP address belongs to one of the outgoing interface subnets
NEW QUESTION # 61
Four FortiGate devices configured for OSPF connected to the same broadcast domain. The first unit is elected as the designated router. The second unit is elected as the backup designated router.
Under normal operation, how many OSPF full adjacencies are formed to each of the other two units?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION # 62
Examine the following traffic log; then answer the question below.
date-20xx-02-01 time=19:52:01 devname=master device_id="xxxxxxx"
log_id=0100020007 type=event subtype=system pri critical vd=root service=kemel status=failure msg="NAT port is exhausted." What does the log mean?
- A. The limit for the maximum number of simultaneous sessions sharing the same NAT port has been reached.
- B. FortiGate does not have any available NAT port for a new connection.
- C. The limit for the maximum number of entries in the NAT port table has been reached.
- D. There is not enough available memory in the system to create a new entry in the NAT port table.
Answer: A
NEW QUESTION # 63
Examine the partial output from two web filter debug commands; then answer the question below:
Based on the above outputs, which is the FortiGuard web filter category for the web site www.fgt99.com?
- A. General organization.
- B. Information technology.
- C. Business.
- D. Finance and banking
Answer: C
NEW QUESTION # 64
View the exhibit, which contains the output of a web diagnose command, and then answer the question below.
Which one of the following statements explains why the cache statistics are all zeros?
- A. The FortiGuard web filter cache is disabled in the FortiGate's configuration.
- B. There are no users making web requests.
- C. FortiGate is using a flow-based web filter and the cache applies only to proxy-based inspection.
- D. The administrator has reallocated the cache memory to a separate process.
Answer: A
NEW QUESTION # 65
View these partial outputs from two routing debug commands:
Which outbound interface will FortiGate use to route web traffic from internal users to the Internet?
- A. port1
- B. Both port1 and port2
- C. port3
- D. port2
Answer: A
NEW QUESTION # 66
Examine the output of the 'diagnose debug rating' command shown in the exhibit; then answer the question below.
Which statement are true regarding the output in the exhibit? (Choose two.)
- A. The TZ value represents the delta between each FortiGuard server's time zone and the FortiGate's time zone.
- B. There are three FortiGuard servers that are not responding to the queries sent by the FortiGate.
- C. A server's round trip delay (RTT) is not used to calculate its weight.
- D. FortiGate will send the FortiGuard queries to the server with highest weight.
Answer: A,D
NEW QUESTION # 67
An administrator cannot connect to the GIU of a FortiGate unit with the IP address 10.0.1.254. The administrator runs the debug flow while attempting the connection using HTTP. The output of the debug flow is shown in the exhibit:
Based on the error displayed by the debug flow, which are valid reasons for this problem? (Choose two.)
- A. Redirection of HTTP to HTTPS administrative access is disabled.
- B. HTTP administrative access is disabled in the FortiGate interface with the IP address 10.0.1.254.
- C. HTTP administrative access is configured with a port number different than 80.
- D. The packet is denied because of reverse path forwarding check.
Answer: B,C
NEW QUESTION # 68
Which configuration can be used to reduce the number of BGP sessions in an IBGP network?
- A. Neighbor range
- B. Next-hop-self
- C. Neighbor group
- D. Route reflector
Answer: D
NEW QUESTION # 69
Examine the following partial output from a sniffer command; then answer the question below.
What is the meaning of the packets dropped counter at the end of the sniffer?
- A. Number of total packets dropped by the FortiGate.
- B. Number of packets that matched the sniffer filter but could not be captured by the sniffer.
- C. Number of packets that didn't match the sniffer filter.
- D. Number of packets that matched the sniffer filter and were dropped by the FortiGate.
Answer: B
NEW QUESTION # 70
An administrator has configured two FortiGate devices for an HA cluster. While testing the HA failover, the administrator noticed that some of the switches in the network continue to send traffic to the former primary unit. The administrator decides to enable the setting link-failed-signal to fix the problem .
Which statement is correct regarding this command?
- A. Disables all the non-heartbeat interfaces in all the HA members for two seconds after a failover.
- B. Sends a link failed signal to all connected devices.
- C. Sends an ARP packet to all connected devices, indicating that the HA virtual MAC address is reachable through a new master after a failover.
- D. Forces the former primary device to shut down all its non-heartbeat interfaces for one second while the failover occurs.
Answer: D
NEW QUESTION # 71
An LDAP user cannot authenticate against a FortiGate device.
Examine the real time debug output shown in the exhibit when the user attempted the authentication; then answer the question below.
Based on the output in the exhibit, what can cause this authentication problem?
- A. The FortiGate has been configured with the wrong authentication schema.
- B. User student is not found in the LDAP server.
- C. User student is using a wrong password.
- D. The FortiGate has been configured with the wrong password for the LDAP administrator.
Answer: B
NEW QUESTION # 72
An administrator added the following Ipsec VPN to a FortiGate configuration:
configvpn ipsec phasel -interface
edit "RemoteSite"
set type dynamic
set interface "portl"
set mode main
set psksecret ENC LCVkCiK2E2PhVUzZe
next
end
config vpn ipsec phase2-interface
edit "RemoteSite"
set phasel name "RemoteSite"
set proposal 3des-sha256
next
end
However, the phase 1 negotiation is failing. The administrator executed the IKF real time debug while attempting the Ipsec connection. The output is shown in the exhibit.
What is causing the IPsec problem in the phase 1 ?
- A. The pre-shared key is wrong
- B. The incoming IPsec connection is matching the wrong VPN configuration
- C. The phrase-1 mode must be changed to aggressive
- D. NAT-T settings do not match
Answer: A
NEW QUESTION # 73
Refer to the exhibits.
Which contain the partial configurations of two VPNs on FortiGate.
An administrator has configured two VPNs for two different user groups. Users who are in the Users-2 group are not able to connect to the VPN. After running a diagnostics command, the administrator discovered that FortiGate is not matching the user-2 VPN for members of the Users-2 group.
Which two changes must administrator make to fix the issue? (Choose two.)
- A. Use different pre-shared keys on both VPNs
- B. Change to aggressive mode on both VPNs.
- C. Enable Mode Config on both VPNs.
- D. Set up specific peer IDs on both VPNs.
Answer: B,D
Explanation:
To set peer-id, the VPN must be set in aggressive mode - https://community.fortinet.com/t5/FortiGate/Technical-Tip-How-to-use-Peer-IDs-to-select-an-IPSec-dialup/ta-p/192292
NEW QUESTION # 74
......
Ace Fortinet NSE7_EFW-7.0 Certification with Actual Questions Aug 08, 2023 Updated: https://examkiller.itexamreview.com/NSE7_EFW-7.0-valid-exam-braindumps.html
