Latest VMware 2V0-33.22 Exam questions and answers
ITexamReview 2V0-33.22 Exam Practice Test Questions (Updated 129 Questions)
VMware 2V0-33.22 is a certification exam that is designed to test your skills and knowledge in VMware Cloud technology. 2V0-33.22 exam is intended for candidates who want to become VMware Cloud Professionals and have a good understanding of the VMware Cloud infrastructure. 2V0-33.22 exam is computer-based and consists of 70 multiple-choice questions. The time allowed for the exam is 120 minutes, and the passing score is 300 out of 500.
NEW QUESTION # 58
A customer needs to set up a self-managed VDI solution that can be deployed to any VMware Cloud. Which two VMware solutions can meet this requirement? (Choose two.)
- A. VMware ThinApp
- B. VMware Workspace ONE Access
- C. VMware Horizon
- D. VMware Workspace ONE Unified Endpoint Management (UEM)
- E. VMware Dynamic Environment Manager (DEM)
Answer: B,C
NEW QUESTION # 59
What is the key difference between configuring Hybrid Linked Mode from the Cloud Gateway Appliance and the VMware vSphere Client?
- A. Centralized administration is available through the VMware vSphere Client.
- B. Minimal overhead is required in the on-premises data center.
- C. The on-premises VMware vSphere version must be vSphere 6.5 or later.
- D. VMware Cloud on AWS software-defined data center (SDDC) does NOT reveal the on-premises inventory
Answer: C
NEW QUESTION # 60
A cloud administrator is deploying a new software-defined data center (SDDC) in VMware Cloud on AWS. Long-term planning indicates that a minimum of 30 hosts are required.
What is a valid management network CIDR based on the requirements?
- A. 10.2.0.0/16
- B. 10.3.0.0/24
- C. 10.4.0.0/23
- D. 10.1.0.0/20
Answer: D
Explanation:
https://blogs.vmware.com/cloud/2019/10/03/selecting-ip-subnets-sddc/
NEW QUESTION # 61
A cloud administrator is asked to validate a proposed internetworking design that will provide connectivity to a VMware Cloud on AWS environment from multiple company locations. The following requirements must be met:
- A. Connectivity the VMware Cloud on AWS environment must NOT have a single point of failure.
- B. Any network traffic between on-premises company locations must be sent over a private IP address space.
- C. Connectivity the VMware Cloud on AWS environment must support high-throughput data transfer.
Answer: C
NEW QUESTION # 62
With which solution is the cloud administrator interfacing when defining storage policies in a VMware Cloud software-defined data center (SDDC)?
- A. iSCSI
- B. VMware Virtual Volumes (vVols)
- C. VMware Virtual Machine File System (VMFS)
- D. VMware vSAN
Answer: D
Explanation:
VMware vSAN is a distributed storage platform that is integrated into the VMware Cloud software-defined data center (SDDC). It provides policy-based storage management, allowing cloud administrators to define storage policies that can be applied to virtual machines and other workloads. These policies govern how data is stored, replicated, and secured, and are used to ensure that data is stored in a consistent and compliant manner.
NEW QUESTION # 63
Which statements accurately describe gateway firewalls and distributed firewalls? (Select two options)
- A. A gateway firewall protects north-south traffic.
- B. Only gateway firewalls use stateful rules.
- C. A distributed firewall controls the I/O path to and from a VM's virtual NI
- D. Gateway firewalls and distributed firewalls can share the same sets of rules and policies.
Answer: A,B
Explanation:
Explanation
Gateway firewalls are used to protect east-west traffic, while distributed firewalls control the I/O path to and from a VM's virtual NIC. Furthermore, gateway firewalls and distributed firewalls cannot share the same sets of rules and policies.
NEW QUESTION # 64
How much throughput does a Google Cloud VMware Engine private cloud network provide?
- A. 10 Gbps
- B. 40 Gbps
- C. 100 Gbps
- D. 25 Gbps
Answer: C
NEW QUESTION # 65
A cloud administrator requires an external secure connection into their data center to use Border Gateway Protocol (BGP). Which connection type can they use to connect to an Instance of VMware Cloud?
- A. Route-based virtual private network (VPN)
- B. Private L2 virtual private network (VPN)
- C. Policy-based virtual private network (VPN)
- D. Public IPs over the Internet
Answer: A
Explanation:
https://docs.vmware.com/en/VMware-Cloud-Disaster-Recovery/services/vmware-cloud-dr-security-best-practices/GUID-BCC03463-437B-4DBE-BE21-0D43D5BA5776.html A cloud administrator requires an external secure connection into their data center to use Border Gateway Protocol (BGP). The best connection type to use for this purpose is a Route-based virtual private network (VPN). This type of VPN is secure, as it uses encryption and authentication to protect the data transmitted over the connection. Additionally, it allows for the configuration of BGP to ensure that the data traffic is routed to the desired destination.
https://www.vmware.com/content/dam/digitalmarketing/vmware/en/pdf/products/vmc-aws/preparing-for-vmware-cloud-on-aws.pdf PREPARING FOR VMWARE CLOUD ON AWS
https://www.vmware.com/content/dam/digitalmarketing/vmware/en/pdf/products/vmc-aws/preparing-for-vmware-cloud-on-aws.pdf
https://vcdx.vmware.com/content/dam/digitalmarketing/vmware/ru/pdf/techpaper/vmware-horizon-7-application-publishing.pdf Publishing Applications with VMware Horizon 7
https://vcdx.vmware.com/content/dam/digitalmarketing/vmware/ru/pdf/techpaper/vmware-horizon-7-application-publishing.pdf
https://www.vmware.com/topics/glossary/content/network-virtualization.html What is Network Virtualization? | VMware Glossary
https://www.vmware.com/topics/glossary/content/network-virtualization.html
NEW QUESTION # 66
When configuring VMware Cloud Disaster Recovery (VCDR), with what can protection groups and disaster recovery plans be associated?
- A. Multiple vCenter instances in the same VMware Cloud software-defined data center (SDDC) or on-premises data center.
- B. Only a single vCenter Instance in the VMware Cloud software-defined data center (SDDC) or multiple vCenter Instances In the on-premises data center.
- C. Multiple vCenter instances in the same VMware Cloud software-defined data center (SDDC) or only a single vCenter in the on-premises data center.
- D. Only a single vCenter Instance In the on-premises data center or VMware Cloud software-defined data center (SDDC).
Answer: D
Explanation:
vCenter Mapping Mapping vCenters in a DR plan consists of selecting source vCenters that are registered to the protected site. Choosing a target vCenter for a Failover SDDC is simple; each SDDC contains a single vCenter instance. For VMware Cloud Disaster Recovery, keep in mind that a protected site can have multiple registered vCenters, but you can only map one vCenter on VMware Cloud on AWS per-DR plan. https://vmc.techzone.vmware.com/resource/introduction-vmware-cloud-disaster-recovery#inventory-and-resource-mapping https://vmc.techzone.vmware.com/resource/protection-groups-and-recovery-plans-vcdr#create-a-disaster-recovery-plan
NEW QUESTION # 67
A cloud administrator needs to create an isolated network segment for use in disaster recovery test. Which type of network segment is required?
- A. Routed
- B. Disconnected
- C. Extended
- D. Private
Answer: D
NEW QUESTION # 68
A cloud administrator needs to create a secure connection over the Internet between an on-premises data center and a VMware Cloud software-defined data center (SDDC).
Which solution can accomplish this goal?
- A. VMware Site Recovery Manager
- B. VMware NSX
- C. VMware Cloud Director
- D. VMware vRealize Network Insight
Answer: B
Explanation:
VMware NSX is a network virtualization and security platform that provides a range of features for creating and managing virtual networks, including the ability to create secure connections over the Internet between on-premises data centers and VMware Cloud software-defined data centers (SDDCs). NSX allows you to create logical networks that are isolated from the underlying physical infrastructure, providing enhanced security and flexibility. With NSX, you can create secure, encrypted connections between your on-premises data center and your VMware Cloud SDDC, allowing you to easily and securely connect your workloads and applications running in the cloud to your on-premises resources.
NEW QUESTION # 69
A cloud administrator needs to create an isolated network segment for use in disaster recovery test. Which type of network segment is required?
- A. Routed
- B. Disconnected
- C. Extended
- D. Private
Answer: D
Explanation:
Explanation
A private network segment is an isolated network segment that is used for disaster recovery testing. Private network segments provide a secure and isolated environment for testing, allowing administrators to test their disaster recovery plans without risking the stability of their production environment. Private network segments also provide additional security, as they are not connected to the public internet, making them less vulnerable to external attacks. [1]
[1]https://docs.vmware.com/en/VMware-Cloud-on-AWS/services/com.vmware.vmc-aws.networking/GUID-64D
NEW QUESTION # 70
As per company policy, all administrator level accounts need to have their password changed on a regular basis. The [email protected] account password is changed by an administrator from the vSphere Client.
Another administrator is using the credentials in the VMware Cloud console and gets an 'access denied' error.
What could be the problem?
- A. The password should only be changed through the VMware Cloud console.
- B. The password change email confirmation has NOT been approved by the organization owner.
- C. The password should be changed by escalation of privileges.
- D. The new password is NOT synchronized with the password that is displayed for the Default vCenter user account.
Answer: D
NEW QUESTION # 71
Which two use cases can be met with VMware Cloud on Dell EMC and VMware Cloud on AWS Outposts? (Choose two.)
- A. On demand rapid scalability
- B. Applications needing local data processing and/or low latency integrations
- C. Critical workloads that use restricted data
- D. Administrator rights in SDDC Manager to configure and operate the solution
- E. Ability to create public services
Answer: A,E
NEW QUESTION # 72
Which two statements depict the VMWare Multi-cloud Vision? (Choose two)
- A. Standardize at the DevSecOps and infrastructure level.
- B. Run the workloads in the cloud to eliminate security issues.
- C. Modernize applications in the cloud of choice using the cloud-native services of that cloud provider
- D. Reduce the number of developers to increase productivity
- E. Deliver a consistent management and operations layer across any cloud
Answer: C,E
Explanation:
Explanation
VMware Multi-Cloud Vision enables customers to deliver a consistent management and operations layer across any cloud, and to modernize applications in the cloud of choice using the cloud-native services of that cloud provider. It does not run workloads in the cloud to eliminate security issues, standardize at the DevSecOps and infrastructure level, or reduce the number of developers to increase productivity.
NEW QUESTION # 73
Which two use cases can be met with VMware Cloud on Dell EMC and VMware Cloud on AWS Outposts?
(Choose two.)
- A. On demand rapid scalability
- B. Ability to create public services
- C. Critical workloads that use restricted data
- D. Applications needing local data processing and/or low latency integrations
- E. Administrator rights in SDDC Manager to configure and operate the solution
Answer: C,D
Explanation:
Explanation
The two use cases that can be met with VMware Cloud on Dell EMC and VMware Cloud on AWS Outposts are Option C: Applications needing local data processing and/or low latency integrations, and Option D:
Critical workloads that use restricted data.
VMware Cloud on Dell EMC and VMware Cloud on AWS Outposts both provide local data processing and low latency integrations, making them ideal for applications that require quick and efficient access to data.
Additionally, the highly secure infrastructure of both solutions make them a great choice for critical workloads that use restricted data.
For more information, please refer to the official VMware documentation on VMware Cloud on Dell EMC:https://www.vmware.com/products/vmware-cloud-on-dellemc.htmlAnd the official VMware documentation on VMware Cloud on AWS Outposts:https://www.vmware.com/products/vmware-cloud-on-aws-outposts.html
NEW QUESTION # 74
A cloud administrator is managing a Google Cloud VMware Engine environment with a single cluster consisting of 28 Hosts. The Administrator and, based on estimates from the application team, requires seven additional hosts. What should the administrator do?
- A. Provision a new private cloud.
- B. Provision a new cluster.
- C. Add seven hosts to the existing cluster.
- D. Nothing; the cluster will scale automatically.
Answer: B
Explanation:
Explanation
https://cloud.google.com/vmware-engine/docs/concepts-vmware-componentsNode Considerations You can specify the number of hosts to add or remove to or from their cluster.
Private cloud initial setup happens in ~30 minutes.
Additional hosts can be added in ~15 minutes.
A three-node cluster is the minimum for production.
You can have up to 32 hosts per cluster.
You can have up to 64 hosts per private cloud.
NEW QUESTION # 75
A cloud administrator wants to enable administrator wants to enable Enterprise Federation to the Cloud Services Portal in order to be able to authenticate with the on-premises Active Directory. The Administrator Already deployed the on-premises VMware Workspace One Access Connector. Through which port does the Cloud Service Portal communicate with Workspace ONE Access Connector?
- A. https/443
- B. http/80
- C. ldap/389
- D. ldaps/636
Answer: A
Explanation:
https://docs.vmware.com/en/VMware-Workspace-ONE-Access/20.10/workspace_one_access_install/GUID-E81B6B1B-A3D1-40D0-806A-3D31502C53A5.html The Cloud Services Portal communicates with the Workspace ONE Access Connector via port 443 (HTTPS). According to the VMware documentation [1], the Cloud Services Portal connects to the Access Connector on port 443 to authenticate users and authorize access to the cloud service. The Access Connector listens on port 443 and communicates with the Active Directory using LDAP over TLS (LDAPS) on port 636. Reference: https://docs.vmware.com/en/VMware-Workspace-ONE-Access/services/com.vmware.access.admin.configure.doc/GUID-F5C6FD9E-36DA-4B1F-A7E7-CF8F64A81D78.html
NEW QUESTION # 76
A cloud administrator wants to view and manage workloads across both an on-premises environment and a VMware Cloud on AWS software-defined data center (SDDC).
Which solution meets this requirement?
- A. Hybrid Linked Mode
- B. VMware HCX
- C. vCenter Single Sign-On
- D. Enhanced Linked Mode
Answer: A
Explanation:
https://docs.vmware.com/en/VMware-Cloud-on-AWS/services/com.vmware.vsphere.vmc-aws-manage-data-center-vms.doc/GUID-91C57891-4D61-4F4C-B580-74F3000B831D.html
NEW QUESTION # 77
With which solution is the cloud administrator interfacing when defining storage policies in a VMware Cloud software-defined data center (SDDC)?
- A. iSCSI
- B. VMware Virtual Volumes (vVols)
- C. VMware Virtual Machine File System (VMFS)
- D. VMware vSAN
Answer: D
NEW QUESTION # 78
Which two steps does a cloud administrator need to take when protecting a VMware Cloud on AWS software-defined data center (SDDC) with VMware site Recovery? (Choose Two.)
- A. Register the vSphere Replication appliance with vCenter Single Sign-On
- B. Set the NSX-T Edge management gateway firewall rules.
- C. Deploy the vSphere Replication virtual appliance.
- D. Deploy the Site Recovery manager virtual Appliance.
- E. Connect the Site Recovery manager instance on the protected recovery site.
Answer: C,E
NEW QUESTION # 79
A virtual machine running in VMware Cloud on AWS Is experiencing poor CPU performance. What are two steps the cloud administrator can take to troubleshoot this issue? (Choose two.)
- A. Set the power management policy on the VMware ESXi host to "High Performance."
- B. Use the VMware vSphere Client to connect to the VMware vCenter which manages the virtual machine and examine Its performance statistics.
- C. Log in to the VMware ESXi host using SSH and run 'esxtop' to examine CPU statistics.
- D. Physically access the console of the VMware ESXi host where the virtual machine resides and use the command line to review the logs.
- E. Use the Troubleshooting Workbench in VMware vRealize Operations Cloud to look for potential evidence.
Answer: D,E
NEW QUESTION # 80
A cloud administrator is managing a Google Cloud VMware Engine environment with a single cluster consisting of 28 Hosts. The Administrator and, based on estimates from the application team, requires seven additional hosts. What should the administrator do?
- A. Provision a new cluster.
- B. Provision a new private cloud.
- C. Add seven hosts to the existing cluster.
- D. Nothing; the cluster will scale automatically.
Answer: C
NEW QUESTION # 81
A customer needs additional capacity to handle seasonal spikes and decides to use a VMware Public cloud provider the extra capacity. Which use case describes this customer scenario?
- A. Cloud migrations
- B. Modernizing applications
- C. Disaster recovery
- D. Data center extension
Answer: D
Explanation:
This customer scenario describes a use case of extending the capacity of an existing data center with a public cloud provider, such as VMware Cloud. This allows the customer to extend their capacity to handle seasonal spikes in demand, without having to invest in additional physical infrastructure or make significant changes to their existing setup.
According to VMware's official website, "VMware Cloud enables customers to extend their data centers to the public cloud and dynamically scale capacity up or down with the same tools, processes, and policies they use today in their private cloud or data center environments." [1]
[1] https://www.vmware.com/products/vmware-cloud.html
NEW QUESTION # 82
......
VMware 2V0-33.22, also known as the VMware Cloud Professional certification exam, is a credential offered by VMware that validates an individual's knowledge and skills in cloud computing technologies. VMware Cloud Professional certification is designed for IT professionals who work with VMware solutions and want to demonstrate their expertise in cloud computing. VMware Cloud Professional certification exam covers topics such as cloud computing concepts, VMware vSphere, VMware NSX, vRealize Automation, and vRealize Operations.
Pass Your VMware Exam with 2V0-33.22 Exam Dumps: https://examkiller.itexamreview.com/2V0-33.22-valid-exam-braindumps.html
