Download HP HPE6-A81 Exam Dumps to Pass Exam Easily in 2022
Get 100% Real Free HPE Aruba Certified HPE6-A81 Sample Questions
HP HPE6-A81 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
NEW QUESTION 26
You have configured a Guest SSIO with Captive-portaI Web Authentication and MAC authentication. The MAC caching expiry time set to 12 hours and the Guest Account expiration time is set to 8 hours. What will happen if the guest were to disconnect from the SSID and re-connect 9 hours later?
- A. The client will fail the MAC authentication and be denied access to the Guest SSIO.
- B. The client will fail to get the MAC Caching role and will be redirected to the captive portal login page
- C. The client will successfully pass the MAC authentication but still be redirected to captive portal page.
- D. The client will successfully pass the mac authentication until the mac caching time expires.
Answer: C
NEW QUESTION 27
Refer to the exhibit.
What enforcement prof lit will be assigned to the Windows 10 MDH enabled devices if it completes user authentication and is already profiled by ClearPess?
- A. Cisco Redirect URL - Service Unavailable
- B. Default - Deny Access Profile
- C. Cisco Full Access VLAN
- D. Cisco Redirect ACL for profiling
Answer: B
NEW QUESTION 28
What configuration steps should you follow to add terms and conditions page on Guest seIf-registration for CPPM? (Select two).
- A. Edit the creatoracceprterms form field in receipt page and change HTML section by pointing the hyperlink to the HTML file uploaded
- B. Edit the accept_terms form field in receipt page and change HTML section by pointing the hyper link to the HTML file uploaded m Guest Manager
- C. Edit the creetoraccepiterms form field in register page and change HTML section by pointing the hyperlink to the HTML file uploaded
- D. Create an HTML page with custom terms and condition and upload it to public files under Clearpass Guest -> configuration -> content manager
- E. Create an HTML page with custom terms and condition and upload it to private files under Clearpass Guest -> configuration -> content manager
Answer: A,D
NEW QUESTION 29
Refer to the exhibit.
The customer configured a guest operator access by creating a custom operator profile and the built-in universal ClearPass profile mapping translation rule. When he tests the setup, he gets authentication failed. Using the streenshots sent by the customer as a reference, what would suggest to the customer to fix the issue?
- A. To correct the case sensitive attribute name in the enforcement profile to admin_privileges
- B. To re-enter the correct username and password for the Active Directory user Mike07.
- C. To verify if the username Mike07 has the Active Directory Title attribute set as Reception.
- D. To map the operator profile name HS_Receptionist in the translation rule value field
Answer: D
NEW QUESTION 30
Refer to the exhibit.
A customer is doing a new ClearPass installation and is setting up clustering between two ClearPass servers running a 6.8.6 version. The ClearPass server failed to add the subscriber node. The customer was able to login to the console of the ClearPass server with the same CLI password used during the cluster setup. The customer has sent you the screenshots seeking your support Why did an attempt to add a subscriber node failed showing that error?
- A. The subscriber server is running with a public signed and trusted HTTPS certificate
- B. The subscriber server is running with a default self -signed HTTPS certificate
- C. The data and time in the subscriber was not synchronized with the NTP server
- D. The default database certificate used in the publisher server is not a valid certificate
Answer: B
NEW QUESTION 31
Refer to the exhibit.
The users connecting to a wireless SSIO "secure-HS-5007" were being processed by an incorrect 802.1 X service created for VIP access and the user gets deny access. The customer has sent you the screenshot to get your support to resolve the issue What changes will you suggest to fix it?
- A. Delete the HSBuilding 802 IX service, odd VIP access Aruba-Essid-Name as fourth condition to WSBuilding Aruba 802 1X service
- B. To the HS_Building 802.1 X service, add another service rule condition with VIP access Aruba-Essid-Name and leave it in same position
- C. In the HS_Building 802.1X service, remove the service rule condition with Aruba controller location name and leave it in same position
- D. In the HSBuilding 802. IXservice. change the Authentication method for AMCAuth for VIP access and leave it in same position
Answer: C
NEW QUESTION 32
Where is the following information stored in Clear Pass?
- Roles and Posture for Connected Clients - System Health for OnGuard - Machine authentication State - CoA session info - Mapping of connected clients to NAS/NAD
- A. Insight database
- B. Multi-Master cache
- C. ClearPass system cache
- D. Endpoint database
Answer: A
NEW QUESTION 33
Refer to the exhibit.
A customer with multiple Aruba Controllers has just installed a new certificate for "'.customerdomain.com- on all Aruba Controllers While testing the existing guest Self-Registration page the customer noticed that the logins are failing While troubleshooting they are finding no entries in the Event Viewer or Access Tracker for the tests Suspecting that the Aruba Controllers may not be properly posting the credentials from the guest browser, they open the NAS Vendor Settings for the Guest Self-Registration Page.
- A. Add PTR records on the DNS server for "securelogin arubanetworks.com".
- B. Change the "IP Address field to "captiveportal-login.customerdomain.com".
- C. Change the "Secure Login' field to "Use Vendor Default".
- D. Change the 'IP Address field to" securelogin.customerdomain.com
Answer: B
NEW QUESTION 34
There is an Aruba Controller configured to stand Guest AAA requests to ClearPass If the customer would likt tht most effective way to ensure the lowest license usage counts, how should the controller be configured?
- A. Aruba Controller will send stop messages only if EAP termination and Interim accounting are enabled.
- B. Aruba Controller will send stop messages if RADIUS Accounting Server Group is defined in the authentication profile.
- C. Configure EAP Termination on the Aruba Controller and the client will send a stop message.
- D. Aruba Controller will send stop messages only if both accounting and Interim accounting are enabled.
Answer: B
NEW QUESTION 35
A customer is planning to implement machine and user authentication on infrastructure with one Aruba Controller and a single ClearPass Server. What should the customer consider while designing this solution? (Select three.)
- A. Onboard must be used to install the Certificates on the personal devices to do the user and machine authentication
- B. Machine Authentication only uses EAP TLS. as such a PKI infrastructure should be in place for machine authentication.
- C. The Customer should enable Multi-Master Cache Survivability as the Aruba Controller will not cache the machine state.
- D. The Windows User must log off. restart or disconnect their machine to initiate a machine authentication before the cache expires.
- E. The customer does not need to worry about Multi-Master Catht Survivability because the Controller will also cache the machine state.
- F. The machine authentication status rs written in the Multi-master cache on the ClearPass Server for 24 hrs
Answer: A,D,F
NEW QUESTION 36
Your customer has recently implemented a seIf-registration portal in ClearPass Guest to be used on a Guest SSID broadcast from an Aruba controller Your customer has started complaining that the users are not able to reliably access the Internet after clicking the login button on the receipt page They tell you that the users will click the login button multiple times and after about a minute they gam access.
What could be causing this issue?
- A. The guest users are assigned a firewall user role that has a rate limit.
- B. The enforcement profile on ClearPass is set up with an IETF:session delay.
- C. The self-registration page is configured with a 1 minute login delay.
- D. The guest users are assigned multiple DNS servers delaying DNS response.
Answer: B
NEW QUESTION 37
Refer to the exhibit.
You have configured an Onboard portal for single SSID provision. During testing you notice that the QuickConnect Application did not display the "Connect" button, only the finish button. To get connected the test user had to manually connect to the secure-HS-5007 SSID but was prompted for a username and password. Using the screenshots as a reference, how would you fix this issue?
- A. Change the network settings to use EAP-TLS for the authentication protocol.
- B. Check the network settings for the correct SSID name spelling.
- C. Configure the SSID to support both EAP-PEAP and EAP-TLS authentication method
- D. Install a public signed HTTPS web server certificate on the ClearPass server
Answer: D
NEW QUESTION 38
Refer to the exhibit.
The customer complains that the user shown cannot log into the ClearPess Server at an administrator using the [Policy Manager Admin Network Login Service]. What could be the reason for this?
- A. The mapping on the role should be changed to [RADIUS Super Admin]
- B. The account created does not fit this purpose.
- C. The user might be used for a TACACS authentication.
- D. The local user authentication might be disabled.
Answer: B
NEW QUESTION 39
Which statements art true about controller-initiated and server-initiated login method? (Select two)
- A. Controller-initiated login method should be used if the guest user's network login will be handled by the controller-based AP to perform the HTTP post when the user attempts a login.
- B. Controller-initiated login method should be used of the guest user's network login will be handled by the guest browser to perform the HTTP port when the user attempts a login
- C. server-in it will login method should be used if the guest user s network login will be handled by the wired switch by standing the authentication request to (PPM when the user attempts a login
- D. server-initiated login method should be used if the guest users network login will be handled by the ClearPass by standing a CoA after authentication request is posted to itself when the user attempts a login
- E. server-initiated login method should be used if the guest user's network login will be handled by ClearPass by sending the authentication request to itself when the user attempts a login
Answer: B,C,E
NEW QUESTION 40
Refer to the exhibit.
A customer hat configured the Aruba Controller for administrative authentication using ClearPass as A TACAC5 serve' During tasting, the read-only user is getting the root access role What could be a possible reason for this behavior? (Select two.)
- A. On the Controller, the TACACS authentication server is not configured for Session authorization
- B. The ClearPass user role associated to the read-only user is wrong.
- C. The Controller's Admin Authentication Options Default role is mapped to root
- D. The read-only enforcement profile is mapped to the root role
- E. The Controller Sarver Group Hatch Rules are changing the user role.
Answer: B,C
NEW QUESTION 41
A customer has a Clear Pass cluster deployment with four servers, two servers at the data center and two servers at a large remote site connected over an SO-WAN solution. The customer would like to implement OnGuard. Guest Self-Registration, and 802.1 X authentication across their entire environment. During testing the customer is complaining that users connecting to an Instant Cluster Employee S5ID at the remote site, with the OnGuard Persistent Agent installed are randomly getting their health check missed.
What could be a possible cause of this behavior?
- A. The Aruba-user-role received by the IAP is filtering the TCP port 6658 to the Clear Pass servers and after 10 seconds the SSL fallback gets activated and randomly generates the issue
- B. The OnGuard Clients are automatically mapped to the Policy Manager Zone based on their IP range but an ACL on the switch could be blocking access.
- C. The ClearPass Policy Manager zones have been defined but the local IP subnets have not but properly mapped to the zones and the OnGuard Agent might connect to any of the servers in the cluster.
- D. The traffic on the TCP port 6658 is congested due to the fact that this port is also used by the IPSec keep-alive packets of the SO-WAN solution.
Answer: D
NEW QUESTION 42
Refer to the exhibit.
What enforcement profile will be assigned to a client who has successfully completed the user and machine authentication with UNKNOWN posture token?
- A. Redirect to Aruba OnBoard Portal
- B. Redirect to Aruba Dissolvable_page Profile
- C. Redirect to Aruba Quarantine Profile
- D. Deny Access Profile
Answer: B
NEW QUESTION 43
The customer has a 19.940 loT devices connected to the network and would like to use Allow All Mac Auth to authenticate the users and enforce the action based on the condition defined with the fingerprint details of the device. Which Authorization source would you use to decide the access of the devices?
- A. Guest Device Database
- B. Endpoint Database
- C. Local User Database
- D. Clear Pass Profiler Database
Answer: A
NEW QUESTION 44
......
HPE6-A81 Study Guide Realistic Verified Dumps: https://examkiller.itexamreview.com/HPE6-A81-valid-exam-braindumps.html
