2023 Realistic Verified LEED-Green-Associate exam dumps Q&As - LEED-Green-Associate Free Update [Q37-Q52]

Share

2023 Realistic Verified LEED-Green-Associate exam dumps Q&As - LEED-Green-Associate Free Update

Use Real LEED-Green-Associate Dumps - 100% Free LEED-Green-Associate Exam Dumps

NEW QUESTION # 37
A project has 16 employees working for four hours per day, 20 employees working six hours per day, and 10 employees working eight hours per day. What is the Full Time Equivalent (FTE) occupancy of the project?

  • A. 33
  • B. 0
  • C. 1
  • D. 2

Answer: C


NEW QUESTION # 38
Which of the following is a minimum program requirement for the LEED for New Construction and Major Renovations Rating System?

  • A. Define a site boundary for the sole purpose of complying with credits
  • B. Comply with the best practices of the International Organization for Standardization (ISO)
  • C. Comply with minimum project size
  • D. Include temporary structures in floor area calculations

Answer: C

Explanation:
The minimum program requirements (MPRs) are the basic characteristics that a project must possess in order to be eligible for LEED certification. One of the MPRs for the LEED for New Construction and Major Renovations Rating System is to comply with the minimum project size, which is defined as having a gross floor area of at least 1,000 square feet (93 square meters) that is capable of achieving a minimum level of energy efficiency13. Reference: LEED v4 Green Associate Candidate Handbook1, LEED v4 BD+C Reference Guide3


NEW QUESTION # 39
The LEED credits given the greatest weights are credits that

  • A. are included in the LEED for Buildings Operations and Maintenance: Existing Buildings rating system
  • B. contribute to developmental density and Sustainable Sites
  • C. are used in certifying a LEED Platinum Project
  • D. most directly address the most important environmental impacts and human benefits

Answer: D

Explanation:
LEED credits are weighted based on their potential environmental impacts and human benefits. Those that most directly address these areas are given greater weight in the scoring system. This approach is intended to prioritize actions that have the greatest positive impact on critical environmental issues such as climate change, water resources, biodiversity, air pollution, and human health. Reference: LEED Green Associate Candidate Handbook, U.S. Green Building Council resources


NEW QUESTION # 40
A retail store is pursuing LEED for Interior Design and Construction certification. Which of the following strategies should be conducted first?

  • A. Perform a life-cycle analysis
  • B. Create an energy budget analysis
  • C. Perform an energy model according to ASHRAE 90.1
  • D. Conduct a charrette with the project team

Answer: D

Explanation:
Explanation
A charrette is an intensive planning session where citizens, designers, and others collaborate on a vision for development. It provides a forum for ideas and offers the unique advantage of giving immediate feedback to the designers. More importantly, it allows everyone who participates to be a mutual author of the plan. This should be conducted first to ensure all stakeholders are aligned on the project goals and strategies before proceeding with detailed analyses or modeling. References: LEED Green Associate Candidate Handbook,
U.S. Green Building Council resources


NEW QUESTION # 41
LEED for Neighborhood Development encourages

  • A. development in rural areas within 1 mi. (1.60 km) of public transportation, and 3/4 mi. (1.20 km) from a school, medical facility, park and shopping center
  • B. employment of Fair Trade Certified day laborers
  • C. development on federally regulated wetlands
  • D. development within and near existing communities or public transportation infrastructure

Answer: D

Explanation:
LEED for Neighborhood Development (LEED ND) is a rating system that aims to inspire and help create better, more sustainable, well-connected neighborhoods1. It looks beyond the scale of buildings to consider entire communities1. One of the main goals of LEED ND is to reduce vehicle miles traveled (VMT) and greenhouse gas emissions by promoting the location and design of neighborhoods that are accessible by foot or public transportation234. Therefore, LEED ND encourages development within and near existing communities or public transportation infrastructure, which is option C.
Reference:
LEED certification for neighborhood development
LEED for Neighborhood Development - Wikipedia
LEED for Neighborhood Development - Grow Smart RI
LEED for Neighborhood Development - s3.amazonaws.com


NEW QUESTION # 42
Which Is a component of a construction waste management plan?

  • A. Projected cost savings from diverting waste
  • B. Distance of the recycling facility from the project site
  • C. Quantity of waste generated from excavated soil
  • D. List of materials to be diverted from disposal

Answer: D

Explanation:
A list of materials to be diverted from disposal is a component of a construction waste management plan. A construction waste management plan is a document that outlines the goals, procedures, and responsibilities for diverting construction and demolition waste from landfills or incinerators. A list of materials to be diverted from disposal identifies the types and quantities of materials that can be recycled, reused, salvaged, or donated, as well as the destinations and methods for diversion. The other options are not components of a construction waste management plan. Projected cost savings from diverting waste is a potential benefit of implementing a construction waste management plan, but it is not a required component. Quantity of waste generated from excavated soil is a factor that affects the construction waste generation rate, but it is not a component of a construction waste management plan. Distance of the recycling facility from the project site is a factor that affects the transportation emissions and costs associated with diverting waste, but it is not a component of a construction waste management plan. Reference: LEED Green Associate Candidate Handbook, page 28; USGBC, [Materials and Resources], page 3.


NEW QUESTION # 43
A building owner has set a goal of reducing water use by 20% for the upcoming year. Which of the following strategies will aid in reducing indoor water demand to achieve the water reduction goal set by the owner?

  • A. Installing building-level water meters
  • B. Using potable water for flush functions
  • C. Installing dual-flush toilets
  • D. Collecting rainwater in cisterns

Answer: C

Explanation:
Explanation
Installing dual-flush toilets can significantly reduce indoor water demand. Dual-flush toilets have two flush options: a half flush for liquid waste and a full flush for solid waste. By using less water for liquid waste, these toilets can reduce overall water consumption by up to 30%, helping to achieve the owner's water reduction goal. References: LEED Green Associate Candidate Handbook, U.S. Green Building Council resources


NEW QUESTION # 44
Which industry benchmarking tool is used for measuring ongoing energy performance?

  • A. Bright Power's EnergyScoreCard
  • B. U.S. Department of Energy's EnergyIQ
  • C. U.S. Department of Energy's EnerCop
  • D. EPA's ENERGY STAR Portfolio Manager

Answer: D

Explanation:
ENERGY STAR Portfolio Manager is an online tool developed by the U.S. Environmental Protection Agency (EPA) that allows building owners and managers to measure and track the energy and water performance of their buildings, as well as benchmark their buildings against similar buildings nationwide. The tool uses a 1-100 ENERGY STAR score to rate the energy efficiency of a building relative to its peers, where a score of 50 represents median performance and a score of 75 or higher indicates top performance1 . Reference: LEED v4 Green Associate Candidate Handbook1, ENERGY STAR Portfolio Manager


NEW QUESTION # 45
Which of the following falls under the Energy and Atmosphere credit category?

  • A. Enhanced Refrigerant Management
  • B. Interior Lighting
  • C. Heat Island Reduction
  • D. Cooling Tower Water Use

Answer: C


NEW QUESTION # 46
Which of the following standards addresses guidance for sustainable construction in complying with building codes?

  • A. ASHRAE 62.1
  • B. ASHRAE 90.1
  • C. ASHRAE 72
  • D. ASHRAE 189.1

Answer: D


NEW QUESTION # 47
According to a study completed by the Heschong Mahone Group, which of the following Indoor Environmental Quality strategies can improve student test scores in schools by 7%-18%?

  • A. Using thermal comfort controls
  • B. Putting plants in the classroom
  • C. Providing increased dayliqhting
  • D. Installing ergonomic furniture

Answer: C

Explanation:
Explanation
According to a study completed by the Heschong Mahone Group, providing increased daylighting in schools can improve student test scores by 7%-18%. Daylighting is the practice of placing windows, skylights, other openings, and reflective surfaces so that sunlight (direct or indirect) can provide effective internal lighting.
Particular attention is given to daylighting while designing a building when the aim is to maximize visual comfort or to reduce energy use. References: LEED Green Associate Candidate Handbook, U.S. Green Building Council resources


NEW QUESTION # 48
Which of the following terms encourages team members to collaborate throughout the process of design and construction to create synergistic solutions?

  • A. Charrette
  • B. Triple bottom line
  • C. Life-cycle analysis
  • D. Integrative design

Answer: D

Explanation:
Explanation
Integrative design is the term that encourages team members to collaborate throughout the process of design and construction to create synergistic solutions. Integrative design is an approach that considers the interrelationships among various building systems, environmental factors, and occupant needs, and seeks to optimize the performance, cost, and environmental benefits of the project. The LEED Green Associate Candidate Handbook states that one of the intents of the Integrative Process category is to "support high-performance, cost-effective project outcomes through an early analysis of the interrelationships among systems" [1, p. 12]. References: LEED Green Associate Candidate Handbook, [Integrative Design Process | Whole Building Design Guide]


NEW QUESTION # 49
Which methodology is used to evaluate and study the economic performance of a building or system over its entire life?

  • A. Energy costing
  • B. Materials assessment
  • C. Triple bottom line
  • D. Life cycle assessment

Answer: D

Explanation:
The methodology that is used to evaluate and study the economic performance of a building or system over its entire life is life cycle assessment (LCA). LCA is a technique that assesses the environmental aspects and potential impacts associated with a product, process, or service throughout its life cycle, from raw material extraction to end-of-life disposal or recycling7. LCA can also include an economic dimension by incorporating life cycle costing (LCC), which estimates the total costs of ownership over the life cycle of a product or system8. By combining LCA and LCC, one can evaluate the environmental and economic performance of a building or system in a holistic way, taking into account both the initial investment costs and the long-term operational costs. This can help identify trade-offs and synergies between environmental and economic objectives, as well as opportunities for improving efficiency and reducing impacts9. Reference: Life-cycle assessment7; What is Life Cycle Assessment (LCA)?8; Life Cycle Costing in Construction Projects: A Case Study of a Municipal Building in Portugal9


NEW QUESTION # 50
Light colored paving and cool roofs are terms referring to materials with

  • A. lower emissivity and lower albedo
  • B. higher emissivity and higher albedo
  • C. lower emissivity and higher albedo
  • D. higher emissivity and lower albedo

Answer: C


NEW QUESTION # 51
Which statement is the U.S. Green Building Council vision?

  • A. Meeting the goals of the Paris Agreement and improving the lives of millions of citizens through better buildings
  • B. Buildings and communities will regenerate and sustain the health and vitality of all life within a generation
  • C. To transform the building and construction sector across three strategic areas - climate action, health and wellbeing and resources and circularity
  • D. A transformed built environment leading to a sustainable future

Answer: B

Explanation:
The statement that is the U.S. Green Building Council (USGBC) vision is: Buildings and communities will regenerate and sustain the health and vitality of all life within a generation. USGBC is a non-profit organization that promotes sustainability in the building industry through its LEED rating system, education programs, advocacy initiatives, and research projects. USGBC's vision reflects its commitment to transforming the built environment into one that supports human health, environmental quality, social equity, and economic prosperity1 . Reference: LEED v4 Green Associate Candidate Handbook1, USGBC's Vision


NEW QUESTION # 52
......

Pass LEED-Green-Associate exam Updated 244 Questions: https://examkiller.itexamreview.com/LEED-Green-Associate-valid-exam-braindumps.html